Mobile roll forming machine for rain gutters
from € 169.000,-
|Lease options:||€ 3.404,- 60 months € 2.332,- 96 months|
This mobile roll forming machine for rain gutters works with coated steel 0.8 mm. Material width 616 mm, radius 8 mm.
The decoiler is attached to and placed above the machine. It is suitable for coils of 2500 kg and a diameter of 1200 mm. Machine length: 5000 mm, width 1400 mm. Max. weight 3000 kg.
Roll forming speed: 40 m/min.
Mobile roll forming machines are designed for on-site roll forming of profiles from coil. The coil hangs above or below the machine and the whole unit is movable to produce profiles in the right position or in a special place. Often these are longer lengths that are therefore impossible to transport. This machine is manageable with a manitou or forklift.
The specialty of making a mobile machine is mainly the limitation in length. Roll forming often requires a lot of length to form a profile step by step. This is especially true as the material becomes thicker and the profile higher. So at each step it is manually calculated whether it can be done and whether it does not give distortions that are not desired.
Machine too heavy?
This machine was not allowed to weigh more than 3,000 kg because it must be transported through the fields, with a telescopic handler. Therefore, this frame is designed to be strong enough but light enough at the same time.
Requesting a quote
Interested in a (similar) machine, applications and/or possibilities? Contact us with no obligation!