Specifications
What’s new on the THALMANN D-POWER double bender?
- New safety system
- Available as a retrofit on existing TD machines
- Machine start via remote control
- Improved bending beam retraction
- Thicker clamp bars
- Energy-efficient servo drive
- Flexible side-charging concept
- Optimized extendable plate support tables
THALMANN D-POWER double bender
from € 0,-
Double bender THALMANN D-POWER – NEW
Available from 2026
Innovation, quality, safety, economic efficiency, service and warranty of the THALMANN D-POWER double bender are important criteria for us.
General features of the THALMANN D-POWER double bender – RENEWED
Single head
- QR code scanner
Multi-head 1250 mm
- Loads up to 4 plates simultaneously: in 4-section mode.
- Charges more than 40% faster.
- Ultrasonic sensor and vacuum injector; for accurate height detection and separation of plates.
- Software supports single or multiple plates; shows position of plate on loading table.
Features
Increased bending beam retraction
Horizontal bending clearance
old: 110 mm
new: 200 mm
-> plus 90 mm
Typical applications with depths up to 200 mm
- Tray gutter profiles (see example on the right)
- gutter profiles
- omega profiles
- shutter boxes
- trapezoidal plates with high ribs
- U or C sections
- industrial parts in general
Thicker clamp bars
Cross-sectional clamping beam
Old: 28 mm
New in the THALMANN D-POWER: 43 mm (The first TC300 had 39 mm at the time)
→ Plus 15 mm
What are the benefits?
- More even results over the entire machine length when closing hems.
- More unformal results across the entire machine length when press bending.
- Greater stability when bending sheets at the maximum capacity of the machine.
Energy-efficient servo drive technology
What are the advantages of the THALMANN D-POWER long chair?
- Reduced energy consumption
- TD old 23.6 kW/h – TD Quadro 4.7 kW/h
- Reduced oil requirements
- New: 160 lt. > Old: 250 lt. or. 500 lt.
- Lower noise emission → Quieter
- Reduced space requirements
- Smooth operation
- No cooling unit required (climate up to 35°C
- Easily accessible unit → Service friendly
Flexible side loading
Multi-head with double plate detection and loading head with scissor lift system
What are the benefits?
- reduced process reliability
- Greater process flexibility
- Can load from customer’s table
- Easier installation
- Less maintenance
Comparison of loading times between a “Single Head” and a “Multi Head”:
1: Loading 2 strips in succession takes 25 versus 15 seconds.
2: Loading 3 strips in succession takes 35 versus 20 seconds.
3: Loading 4 strips in succession takes 45 versus 25 seconds.
Improved extendable transport table
What are the advantages of the THALMANN D-POWER double bender?
Extended displacement distance
Old: 700 mm
New: 900 mm
→ Plus 200 mm
- Simplified manual loading with the THALMANN D-POWER double bender
→ when pulling sheets sideways onto the table –→ - Larger working range for automatic plate flipping
→ Old: up to 600 mm / New: up to 800 mm - Simplified manual unloading
The CIDAN Group’s THALMANN D-POWER double bender is a very powerful, updated machine concept, which will give your production hall an enormous boost in terms of possibilities and efficiency.
– – – C O M I N G – S O O N ( 2 0 2 6 ) – – –
Click here for more info about
the THALMANN double folder
In the area of:
Requesting a quote
Interested in a (similar) machine, applications and/or capabilities? Contact us with no obligation!